Author Topic: Making my Gouda in Thailand  (Read 1419 times)

Offline mbox

  • Life is good - Cheese makes it better!
  • Mature Cheese
  • ****
  • Location: Thailand
  • Posts: 136
  • Cheeses: 5
    • >>>Heaven On Cheese<<<
Making my Gouda in Thailand
« on: September 06, 2011, 08:02:56 PM »
First post in the Thailand section  ;D
Well, i recently re-started cheese making ...the first time i tried was not very successful. So i decided as second cheese since re-start ( first one was fromage blanc ) a Gouda....i have started up with rather "wild" equipment but am trying to get more suitable stuff as time progresses....

This cheese was made in mid august 2011.

Here is the recipe i used..

1) 5ltr Milk pasteurized Magnolia brand ( from Makro - 172 thb https://lh4.googleusercontent.com/-7zpxaVYzsF4/Tk0nrJsixAI/AAAAAAAAANQ/oWQY_q5EI3U/s800/DSCF2030%252520%252528Large%252529.JPG )
2) quarter Tablet of rennet  ( i used this one : http://www.cheesemaking.com/store/p/108-Tablet-Vegetable-Rennet-10-Tablets.html )
3) a quarter teaspoon  Calcium Chloride ( http://www.cheesemaking.com/CalciumChloride.html )
4) 1 packet Mesophilic Starter ( direct set - http://www.cheesemaking.com/store/p/135-Mesophilic-DS-5pack.html )

For the Salt Brine:
2 cups of Salt
1,5 ltr warm Water

---------------------------------------------------------------------
How i proceeded:

1) warm the Milk to 85 Fahrenheit (29,5 degree Celsius ) while doing this i also started making the salt brine simply adding 2 cups of salt in warm water and dissolve
On picture left the milk and right side the salt brine:


2) the Salt brine is ready once Salt is dissolved and placed in the freezer to cool down (later transfer to fridge)

3) add the Mesophilic Starter & calcium chloride and stir


4) dissolve rennet tablet in cold water ( do not use hot water )


5) when rennet is dissolved add it to the milk and stir for 5 minutes


6) Allow milk to set for about 2 hours
here picture of the already thickening milk after 30 min:


here picture of the curds after 1 hour:


7) After 2 hours your curds should be firm enough to have a clean break - this when you need to cut the curds into half inch cubes ,best with a long knife



8.) let the curds sit to firm up

9) very slowly raise temperature to 102 Fahrenheit (39 celcius) - this temperature climb shall happen in as slow as 45 minutes and during this time gently , very gently you start to stir very slow in order that the curds don't mat together


10) once you reached the 102 fahrenheit ( 39 celcius) remove carefully 3 cups of whey and replace it with 3 cups of water ( also 102 fahrenheit/39 celcius) .



11) keep the curds for another 45 minutes at 102 fahrenheit (39 celcius) and repeat the 3 cups whey with water exchange every 15 minutes.

12) Drain the whey off by pouring through a cheesechlothe lined colander:


13) press the cheese with appr. 9kg of weight for 45 min
i used a water filled pot to press on it



14) i prepared a cheesemold by making holes into a CD case with a soldering Gun (note this need to be 2 CD case as one is the base and the other one for pressing must go on top)


here the cheese mold with the second part for pressing on top:


14) transfer the curds into the cheesemold and apply 18 kg of weight for 3 hours
( i don't have a cheesepress at home and improvised like that :D )



15) Carefully remove the cheese and float it in the earlier prepared cold SALT BRINE for 3 hours ( flip the cheese every 45 minutes to ensure even rind development):




16) Pat dry the cheese and you will feel that the outer surface begun to harden

17) Place cheese in the refrigerator to ripen for 25 days. Turn it every day and i also covered it in order to prevent that it gets too dry on surface:




Well it has done almost all the 25 days but there is only half left :-) i keep tasting it it is very nice ...so i made another one but the pressing was not as successful so i am looking into get myself a cheesepress.

I have ordered cheesewax which will arrive soon and once that is on i will stop tasting it just a little bit here and there making the gouda shrink so fast :-)

mbox


Guests, join the CheeseForum.org community to remove this ad.


Offline Tomer1

  • Old Cheese
  • *****
  • Location: Israel
  • Posts: 1,669
  • Cheeses: 33
  • Default personal text
Re: Making my Gouda in Thailand
« Reply #1 on: September 07, 2011, 02:17:18 AM »
Was the bacterial culture still viable after shipping and spending time unrefrigirated (exposed to high heat,its summer in thailand isnt it?)
Amatuar winemaker,baker, cook and musician
not in any particular order.

Offline mbox

  • Life is good - Cheese makes it better!
  • Mature Cheese
  • ****
  • Location: Thailand
  • Posts: 136
  • Cheeses: 5
    • >>>Heaven On Cheese<<<
Re: Making my Gouda in Thailand
« Reply #2 on: September 07, 2011, 04:33:23 AM »
Was the bacterial culture still viable after shipping and spending time unrefrigirated (exposed to high heat,its summer in thailand isnt it?)

It was a powdered direct set meso starter which i don't think has much of temperature problems-  when my ingredients have arrived i have almost all things (including vegetable tablets ) in the freezer ....i have another shipment of ingredients currently en-route .

mbox

Offline jackbox

  • Medium Cheese
  • ***
  • Location: Bangkok, Thailand
  • Posts: 22
  • Cheeses: 0
  • Default personal text
Re: Making my Gouda in Thailand
« Reply #3 on: June 23, 2012, 11:37:57 PM »
Looks good. Very nice result.

How much calcium chloride and cheese wax did you buy? Want to resell some? Maybe in the future members here in Thailand can coop and buy supplies in bulk to save money.