Author Topic: A swing lever press, The sturdypress "foldup"  (Read 15536 times)

Offline Al Lewis

  • Old Cheese
  • *****
  • Location: Port Orchard Washington
  • Posts: 3,285
  • Cheeses: 179
    • Lou's Food & Drink
Re: A swing lever press, The sturdypress "foldup"
« Reply #15 on: January 24, 2015, 04:58:27 PM »
Al:  Now that I have all the cutting and gluing jigs made I can make a few and see how long it takes. It looks like the price will be a little less than the "origional" sturdypress, and can I quote you about it being the best deal in the country. :)


You certainly may.  That's my opinion.  I viewed everyone I could find before I bought your sturdy press.  Even bought a competitors so I could do a side by side comparison.  You can see that here.  Sold theirs and still use yours today.
Making the World a Safer Place, One Cheese at a Time! My Food Blog and Videos

Offline pastpawn

  • Mature Cheese
  • ****
  • Location: Clearwater, FL
  • Posts: 251
  • Cheeses: 45
  • It aint easy being cheesy
Re: A swing lever press, The sturdypress "foldup"
« Reply #16 on: January 25, 2015, 12:22:51 AM »
When I get this press, I'll do a side-by-side comparison with the sturdypress.  I'll make two goudas.
- Andrew

John@PC

  • Guest
Re: A swing lever press, The sturdypress "foldup"
« Reply #17 on: January 26, 2015, 04:51:30 PM »
Bob, a brilliant design in so many respects.  You know I've been working on a folding press for awhile (still not commercial - too many other darn things that get in the way :() but I have to hand it to you that you have combined a small storage footprint with high pressing capacity without using tackle.  The moving fulcrum is ingenious as is the way the base folds and supports the cantilevered arm without tipping.  AC4U along with a tip of the hat ;).

Offline smolt1

  • Mature Cheese
  • ****
  • Location: oregon
  • Posts: 246
  • Cheeses: 29
  • Default personal text
    • SturdyPress.com
Re: A swing lever press, The sturdypress "foldup"
« Reply #18 on: February 06, 2015, 05:43:02 PM »
For any of you DIYers out there, here is more information:

One of the main problems with the swing lever is placement of the swing to minimize friction on the plunger as it slides during pressing. I have done a lot of testing and here are my findings. One way to test for friction is to insert a strip (about 1/2 inch wide ) of paper on each side of the plunger, then put some weight on the lever arm and see if the piece of paper will pull out without tearing.

It seems that there is a "best" placement for each MA ( mechanical advantage ) used, so for MA = 5 to 12 the placement is a compromise, but the position shown makes the press work smoothly at all those MA's.

Offline OzzieCheese

  • Old Cheese
  • *****
  • Location: Australia
  • Posts: 1,507
  • Cheeses: 171
  • Sun-Grass-Cow-Milk-Cheese-Happiness
Re: A swing lever press, The sturdypress "foldup"
« Reply #19 on: February 07, 2015, 01:08:54 AM »
I posted in the wrong thread.  Here is my Fold-up press of Bobs design.

http://cheeseforum.org/forum/index.php/topic,13846.0.html

I did the friction test - there is a little drag on the paper but it came out easily.  Again, thanks for a great design - now what do I do with my other old creaky ?  If any one in Brisbane wants my old one PM me.

-- Mal
Usually if one person asks a question then 10 are waiting for the answer - Please ask !

Offline Al Lewis

  • Old Cheese
  • *****
  • Location: Port Orchard Washington
  • Posts: 3,285
  • Cheeses: 179
    • Lou's Food & Drink
Re: A swing lever press, The sturdypress "foldup"
« Reply #20 on: March 08, 2015, 01:48:50 AM »
Well Smolt1 I did a parm today and presently have 50 pounds of barbell weights hanging on my Sturdypress.  It creaked a bit but it's holding it just fine!!  450 pounds at the mold.
Making the World a Safer Place, One Cheese at a Time! My Food Blog and Videos

Offline OzzieCheese

  • Old Cheese
  • *****
  • Location: Australia
  • Posts: 1,507
  • Cheeses: 171
  • Sun-Grass-Cow-Milk-Cheese-Happiness
Re: A swing lever press, The sturdypress "foldup"
« Reply #21 on: March 08, 2015, 02:16:23 AM »
All right !!
Usually if one person asks a question then 10 are waiting for the answer - Please ask !

Offline Al Lewis

  • Old Cheese
  • *****
  • Location: Port Orchard Washington
  • Posts: 3,285
  • Cheeses: 179
    • Lou's Food & Drink
Re: A swing lever press, The sturdypress "foldup"
« Reply #22 on: March 08, 2015, 02:31:59 AM »
I've done this before Mal.  This press never ceases to amaze me.
Making the World a Safer Place, One Cheese at a Time! My Food Blog and Videos

Offline smolt1

  • Mature Cheese
  • ****
  • Location: oregon
  • Posts: 246
  • Cheeses: 29
  • Default personal text
    • SturdyPress.com
Re: A swing lever press, The sturdypress "foldup"
« Reply #23 on: March 08, 2015, 05:57:19 AM »
Now I'm getting nervous.

Offline Al Lewis

  • Old Cheese
  • *****
  • Location: Port Orchard Washington
  • Posts: 3,285
  • Cheeses: 179
    • Lou's Food & Drink
Re: A swing lever press, The sturdypress "foldup"
« Reply #24 on: March 08, 2015, 05:30:07 PM »
No need, I just took the weights off after sitting all night and the arm held up just fine with 50 pounds of steel hanging on it!! ;D
Making the World a Safer Place, One Cheese at a Time! My Food Blog and Videos

Offline OzzieCheese

  • Old Cheese
  • *****
  • Location: Australia
  • Posts: 1,507
  • Cheeses: 171
  • Sun-Grass-Cow-Milk-Cheese-Happiness
Re: A swing lever press, The sturdypress "foldup"
« Reply #25 on: March 08, 2015, 09:28:29 PM »
And the foldup is just as reliable... with the longer base plate I have tested it to 3 - 5 litre water bottles 15Kg at the maximum MA setting, in my case 12 times.  No Worries there at all

-- Mal
Usually if one person asks a question then 10 are waiting for the answer - Please ask !

pilhue

  • Guest
Re: A swing lever press, The sturdypress "foldup"
« Reply #26 on: November 24, 2015, 04:09:36 PM »
I am planning to order one of the presses, where / which molds do you recommend. I might want to make 1 or 2 cheeses during one time.

Offline pastpawn

  • Mature Cheese
  • ****
  • Location: Clearwater, FL
  • Posts: 251
  • Cheeses: 45
  • It aint easy being cheesy
Re: A swing lever press, The sturdypress "foldup"
« Reply #27 on: November 25, 2015, 01:33:38 AM »
Wow - 450#.  I have a foldup and the standard sturdypress.  I have to say I was nervous about applying 300# to the foldup and switched to the standard.  Pic below (~275# force I believe).

I love these presses.  They are fantastic.  In fact, I sold my first press (which cost more than both of these combined).  If I was enlisted into the next performance of Sound of Music, I'd work the sturdypress into "these are a few of my favorite things".

- Andrew

lauravanb

  • Guest
Re: A swing lever press, The sturdypress "foldup"
« Reply #28 on: February 19, 2016, 10:10:42 AM »
After a failed cheddar (probably the result of a too-low pressing weight, I am in the market for a new cheese press and this one caught my eye in an old posting. I have a newbie question to add on here.. the site says it can handle 250lbs, does that mean 250lbs of force after the MA? <--- I am assuming! Is this enough for a cheddar in an 8 in mold?

AnnDee

  • Guest
Re: A swing lever press, The sturdypress "foldup"
« Reply #29 on: February 21, 2016, 01:28:52 PM »
I wish you would ship this to Malaysia.