Blakee,
I was going to refer you to
Jack Keller's website, but his site seems to be a bit flakey due a fire and some data loss at his ISP.
So here is a copy/paste of the relevant recipes:
BlueBerry
BLUEBERRY WINE (1) [Full Bodied]
2 lb. blueberries
1 lb. raisins
2 lb. granulated sugar
1/2 tsp. pectic enzyme
1-1/2 tsp. acid blend
1/2 tsp. yeast energizer
1 gallon water
crushed Campden tablet
wine yeast
Bring water to boil, then set aside. Wash and crush blueberries and put in primary fermentation vessel with all ingredients except yeast. Add hot water and stir to dissolve sugar. Cover well and allow to cool to 70-75 degrees F., then add yeast. Stir daily for 5-6 days or until specific gravity is 1.040. Strain out fruit pulp and press. Siphon into secondary fermentation vessel and fit fermentation trap. Rack in three weeks and again in three months. When wine is clear and stable, rack again and bottle. Allow a year to mature. Improves with age. [Adapted from Stanley F. Anderson and Raymond Hull's The Art of Making Wine]
BLUEBERRY WINE (2) [Full Bodied Semi Sec]
2 lb. blueberries
1/2 pt. red grape concentrate
1-3/4 lb. granulated sugar
1/2 tsp. pectic enzyme
1-1/2 tsp. acid blend
1/2 tsp. yeast energizer
1/2 tsp. wine stabilizer
7 pt. water
crushed Campden tablet
wine yeast
Wash and crush blueberries in nylon straining bag and strain juice into primary fermentation vessel. Tie top of nylon bag and place in primary fermentation vessel. Stir in all other ingredients except yeast and red grape concentrate. Stir well to dissolve sugar, cover well, and set aside for 24 hours. Add yeast, cover, and daily stir ingredients and press pulp in nylon bag to extract flavor. When specific gravity is 1.030 (about 5 days), strain juice from bag and siphon liquor off sediments into glass secondary fermentation vessel. Fit fermentation trap. Rack in three weeks and again in two months. When wine is clear and stable, rack again, add stabilizer and red grape concentrate, and bottle. Allow a year to mature. [Adapted from Raymond Massaccesi's Winemaker's Recipe Handbook]
BLUEBERRY PORT WINE
6 lb. blueberries
1/2 pt. red grape concentrate
1/2 c. light dry malt
1-3/4 lb. granulated sugar
1/2 tsp. pectic enzyme
1-1/2 tsp. acid blend
1/2 tsp. yeast energizer
1/2 tsp. wine stabilizer
4 pt. water
crushed Campden tablet
wine yeast
Wash and crush blueberries in nylon straining bag and strain juice into primary fermentation vessel. Tie top of nylon bag and place in primary fermentation vessel. Stir in all other ingredients except yeast and red grape concentrate. Stir well to dissolve sugar, cover well, and set aside for 24 hours. Add yeast, cover, and daily stir ingredients and press pulp in nylon bag to extract flavor. When specific gravity is 1.030 (about 5 days), strain juice from bag and siphon liquor off sediments into glass secondary fermentation vessel. Fit fermentation trap. Rack in three weeks and again in two months. When wine is clear and stable, add red grape concentrate and wine stabilizer, rack again and bottle. Allow a year to mature.
Rhubarb wine
Rhubarb wine is one of those wines you either love or hate. My wife doesn't like the taste of rhubarb in any form, but I do. As a result, I don't make it often and only make a gallon at a time when I do.
Rhubarb contains an excess of oxalic acid, which is what gives it the taste some people find unpleasant. But oxalic acid can be easily removed (as in the recipe below) and the wine will be better for it. Although rhubarb wine has its own taste, it is excellent for blending because it will take up the flavor of whatever it is blended with and in the process will lose most of its own flavor.
If you're not sure you'll like it, you can always make a one-gallon batch and freeze enough rhubarb for another batch or two later. You can save space by crushing the rhubarb and freezing the juice.
Rhubarb Wine
6-7 lbs red rhubarb
2-1/2 lbs finely granulated sugar
2 large lemons (juice only)
water to make up one gallon
1 crushed Campden tablet
1 oz precipitated chalk
1-1/2 tsp yeast nutrient
Sauterne wine yeast
Wash the rhubarb and cut into 1/2-inch lengths. Crush with a piece of sterilized hardwood (the end of a baseball bat is perfect) and put into primary. Dissolve crushed Campden tablet in gallon of cold water and pour over rhubarb. Cover primary and let set for three days, stirring daily. Strain through a nylon straining bag and squeeze as much liquid as possible from the pulp. Discard pulp and return liquor to primary. Add the precipitated chalk (obtainable at winemaking shop). The liquor will fizz, but then settle down. Wait 3 hours and taste. If oxalic acid taste is still too strong, add another 1/2 oz of precipitated chalk. Stir in all remaining ingredients, making sure the sugar dissolves completely. (NOTE: You may want to hold back one pound of the sugar and add it after fermentation is well on its way.) Cover and set aside overnight. Transfer to secondary and fit airlock, but to allow for foaming during fermentation hold back a pint or so in a small bottle plugged with cotton. When ferment settles down (5-7 days), top up with reserved liquor and refit airlock. Set aside in cool place until wine begins to clear. Rack, refit airlock and top up. Allow at least another two months, making sure fermentation has ceased, and rack again. If possible, cold stabilize wine for 30 days. If you can't cold stabilize, at least allow the wine the additional 30 days. Rack into bottles or blend with another wine.
If you bottle the rhubarb wine pure, it is drinkable right away. If you blend it, age it according to instructions for the wine you are blending with. If you make a 3-5-gallon batch, add 1/8 tsp tannin per gallon when you add the other dry ingredients to extend the life of the wine. [Author's own recipe]