CheeseForum.org » Forum
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
This topic
This board
Entire forum
Home
Help
Login
Register
CheeseForum.org » Forum
»
GENERAL CHEESE MAKING BOARDS (Specific Cheese Making in Boards above)
»
EQUIPMENT - Making Cheese
»
vat stirrer!!
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: vat stirrer!! (Read 3302 times)
Chicken man
Guest
vat stirrer!!
«
on:
July 07, 2012, 09:26:15 AM »
Hi all!
Finally got my vat stirrer set up and churns the milk great....but sadly won't stir my cut curds!!
think it would possibly need a broader blade...this on is only about 130mm in diamiter!
have added some pics so you can see the bayonet style fitting on the end for attachment to the drive motor ( an ex-juicer).cheers
Ian
Logged
Tomer1
Guest
Re: vat stirrer!!
«
Reply #1 on:
July 07, 2012, 11:00:24 AM »
I would not use a blade\worm design as you have very little contact area, but two wide rectangular sheets with some empty spots in between so the curds can pass thru.
Also the angular set up (not over head) is a bit weird and you might not get to all the curds.
Logged
hoeklijn
Guest
Re: vat stirrer!!
«
Reply #2 on:
July 07, 2012, 12:48:32 PM »
What's the rps of this stirrer?
Logged
steffb503
Catskill Mts, NY State, USA
Old Cheese
Posts: 595
Cheeses: 11
Re: vat stirrer!!
«
Reply #3 on:
July 07, 2012, 07:37:31 PM »
I am having one made by Frank Kipe at Micro Dairy.
It will fit into my vat from him.
It is just about the full diameter of my vat and is about 5 inch high. We laser cut "teeth" in 1 inch spacings.
I am just waiting on deliver.
Logged
M&S FARM: Raw Goat Milk, Goat Cheese, Free Range Eggs, & Organic Produce.
Chicken man
Guest
Re: vat stirrer!!
«
Reply #4 on:
July 08, 2012, 01:24:45 AM »
Good one Steff!.. If my vat was round that style would be great, but next time maybe!
Herrman, I think the RPM must be about 1 rev per second; is quite slow and great for the milk b4 gelling!
cheers
Ian
Logged
hoeklijn
Guest
Re: vat stirrer!!
«
Reply #5 on:
July 08, 2012, 08:47:24 AM »
OK, that's a good speed, but I think Tomer is right about the placing and blade, it will be hard to stir the curd this way...
Logged
Print
Pages: [
1
]
Go Up
« previous
next »
CheeseForum.org » Forum
»
GENERAL CHEESE MAKING BOARDS (Specific Cheese Making in Boards above)
»
EQUIPMENT - Making Cheese
»
vat stirrer!!