CheeseForum.org » Forum
GENERAL BOARDS => Introductions => Topic started by: Scott Wallen on January 13, 2013, 02:23:42 PM
-
Hello from southern Indiana, first of all I am really new to the art of cheese making and I hope I have not goofed up my cheese, here's what I have done. I started making a Gouda from a kit I got from Ricki Carroll, while leafing back and forth in the recipe booklet i got mixed up and salted the curd, and started pressing as if it were Monterey Jack at 4 lbs for 12 hrs, this morning I realized my mistake and turned the cheese over an increased the weight in my press to 20 lbs. can anyone tell me what will become of my cheese now?
-
If all went well with the rest of the make, it should still turn out to be fine cheese--you could think of it as a goudarey jack. Did the curds knit together well? Also, was the amount of salt you used for the same size cheese (was the gouda and the MJ recipe for the same number of gallons)?
We all make mistakes--especially those of us that are new. Don't worry too much about it.
-
Thank you, Goudarey Jack I like that :). the entire make went well until i got mixed up, the salt was 1 tablespoon, both the recipes called for 2 gallons, however the Gouda did not call for salt at all. The knit looks very good so far.
-
You would have brined the gouda to get salt in it. 1 tablespoon should be good. If you can, post a picture--we all like to see pictures of other people's cheese.
-
as soon at it comes out of the press, I will Post a photo, should I skip the brine step now?
-
I personally wouldn't brine it now. The purpose of brining is to get the salt into the cheese. You've already done that. If you want a salty cheese, you could still do it for a bit, but I certainly wouldn't do it for the whole time suggested.
-
You would have brined the gouda to get salt in it. 1 tablespoon should be good. If you can, post a picture--we all like to see pictures of other people's cheese.
Why is that??? Strange…. :o LOL
-
just out of the press, :D
-
The purpose of brining is to get the salt into the cheese.
And to tighten up the rind.... ;)
-Boofer-
-
"we all like to see pictures of other people's cheese"
sharing is caring :)
-
You would have brined the gouda to get salt in it. 1 tablespoon should be good. If you can, post a picture--we all like to see pictures of other people's cheese.
Why is that??? Strange…. :o LOL
I feel a need to state the obvious. ::)
Viewing pics of cheese, equipment, descriptions of techniques....
- Checking someone else's success/failure against one's own efforts.
- Like fine art, fine dining, fine...anything...just appreciating something done well that pleases the senses.
- Inspecting for possible problems... ??? ...and possibly offering solutions.
- Gathering ideas for one's own future efforts.
-Boofer-
-
just to add something to my previous entry's, Thank you all for your replies they have been helpfull, although I couldn't find on this forum where any one had tried this, I was uncomfortable with the idea of heating on my gas stove to bring the wax to the proper temperature for mold spore killing, even in a double boiler, I was concerned with starting a fire! I purchased an inexpensive electric multi cooker that had a variable temperature control, I simply melted the wax and increased the temp to 240 degrees F. and put my first coat on, I then let the wax cool to around 180 and re dipped to put on a much thicker coat, the cheese looks pretty and I did not burn anything down!
-
I've just an electric stove, but have read precautions about using a gas stove and heating wax hot enough (which, you can't do with a double boiler unless it's somehow pressurized...). I'm glad to hear that things appear to have been successful. Now comes the fun wait... ;)
-
just to add something to my previous entry's, Thank you all for your replies they have been helpfull, although I couldn't find on this forum where any one had tried this, I was uncomfortable with the idea of heating on my gas stove to bring the wax to the proper temperature for mold spore killing, even in a double boiler, I was concerned with starting a fire! I purchased an inexpensive electric multi cooker that had a variable temperature control, I simply melted the wax and increased the temp to 240 degrees F. and put my first coat on, I then let the wax cool to around 180 and re dipped to put on a much thicker coat, the cheese looks pretty and I did not burn anything down!
Check it out (http://cheeseforum.org/forum/index.php/topic,10501.msg81578.html#new).
-
Awesome, Thank you!
-
Hiya Scott!!
Awesome looking cheese.
How long are you going to age it?
-
That one is my first Gouda, or as we nicknamed it Goudarey Jack due to a mix up as I was giveng it life. I will age it for 2 months in the cave. :)
-
Be sure to post when you crack it open.