CheeseForum.org ยป Forum
CHEESE TYPE BOARDS (for Cheese Lovers and Cheese Makers) => ADJUNCT - Lactic Surface White Mold (Penicillium candidum) Ripened => Topic started by: Andrew Marshallsay on February 17, 2014, 10:11:18 AM
-
The latest pair of camemberts, started five days ago, have started to develop a nice white fuzz, as expected. Unfortunately, I discovered some grey patches on them today. I have scraped most of the grey off but I would appreciate any suggestions as to any other measures which I can take to save them. :-[
-
I have never made a Cam, I read some were that grey mold could be what is called cat hair :-\
Take a small amount of salt and vinegar and dab just the grey mold, that should hold it back.
Hope that helps
-
Yea use salt and vinegar or a brine solution.
-
Thanks HKJ & Matthewcraig
I'll give it a try but I'm concerned that it will take out the PC as well. Still, the cheese is stuffed if I do nothing so it's worth a go.
-
I forgot to ask what milk did you use?
-
The milk is a shop-bought jersey milk - pasteurised but not homogenised, with a high fat content. It makes a beautiful camembert (if you don't get cat hair fungus on it).
-
Yes that's good I was going to say most other milks can normally don't work that well it must just be a cross contamination problem just whenever you see any sign of unwanted mould give it a good wipe down, if you are worried you are wiping the good mould off get some milk and heat it up to about 28 c then add 1/16 of penicillium candidum and spray it on with something you would spray a plant with (make sure it new) and it should develop I to a wonderful cambert
-
The brine and vinegar seems to be doing the business on the moggy fur and hasn't knocked the PC around too badly. There are a few bald patches, mostly from where I scraped it initially. I like the idea of the respray. I'll give that a try in a day or two.
-
Yes that has worked for me anyway good luck :)
-
I realize that this is a little late to ask, but isn't Camembert a Rennet curd cheese. So if it is, then I'm confused, why is this post on the Lactic Surface White Mold board?
andreark
-
PC ripened.
-
I think she means, this belongs in "RENNET SURFACE WHITE MOLD (PC Ripened) (http://cheeseforum.org/forum/index.php/board,78.0.html). She's right...John?
-
You are probably right. Pardon my mistake. Anyway, as to the cheese, I wrapped it the other day, at about 4 weeks. It has grown a nice mould coat. The coat is,however, not pure white as my other cams have been. Rather, it has greyish and yellowish patched. It will be interesting to see how it turns out in a few more weeks.
-
Oh, Raw, no worries on my part, certainly. Just wanted to mention andreark was correct, that's all. Thanks for the thread. Cam is a cheese I've yet to try. :)
-
I opened these recently but, sadly, it was not what you would call a success. Still quite firm with no sign of ripening. Taste was somewhat bitter, although not too bad if the rind was removed. (Not that there is much left after the rind is removed on a cheese this size.)
I can only assume that the PC was not as well and active as it looked after the remedial action.
Still, there's always the next one.