I am trying to start a cheese business finally. I have been looking around on the web for a cheese press that is just right for my operation. Ullmers Dairy Equipment had one that looked good to me, but the price seems very low for an all stainless steel piece of equipment. They wanted 3600 dollars for a double headed press on wheels.
The question is has anyone dealt with Ullmers before. I live in Utah so I can't just run to there store and look at what they have.
Also I found the same picture Here http://www.schiercompany.com/pictures/cheese/71137.jpg (http://www.schiercompany.com/pictures/cheese/71137.jpg) of the press that they emailed to me from another company, Is that something to worry about?
Uhlmers is a great company, BUT you are buying used equipment. Caveat emptor.
My milk inspector will turn down any stainless with rust. Before you buy you should talk to your local inspector.
Quote from: Sailor Con Queso on September 26, 2014, 05:57:42 PM
My milk inspector will turn down any stainless with rust.
Hey Sailor, your in the cheese navy. Just slap on some Navel Jelly (http://en.wikipedia.org/wiki/Phosphoric_acid) :). Wait, phosphoric acid has a health hazard of 3 (out of 4) :o? Nevermind ::).
Quote from: Chetty on September 26, 2014, 03:36:32 AM
I am trying to start a cheese business finally. I have been looking around on the web for a cheese press that is just right for my operation. Ullmers Dairy Equipment had one that looked good to me, but the price seems very low for an all stainless steel piece of equipment. They wanted 3600 dollars for a double headed press on wheels.
The question is has anyone dealt with Ullmers before. I live in Utah so I can't just run to there store and look at what they have.
Also I found the same picture Here http://www.schiercompany.com/pictures/cheese/71137.jpg (http://www.schiercompany.com/pictures/cheese/71137.jpg) of the press that they emailed to me from another company, Is that something to worry about?
What sort of quantities of cheese will you be producing and what sort of pressure do you require?
We use a very simple (and inexpensive) method for pressing - we cluster our large cheese molds in groups of 3-5, put a dishwasher tray on top to distribute the weight, and then stack 4-gallon buckets of water on top. It's cheap, effective, and easily cleaned and sourced.
I am planning on making mainly cheddar and Colby style cheese. I would need to be able to press 40lbs of curd at the least and 150 at the most. I would mostly be using 40lb Wilson style hoops.
I will also make sure that I talk to the inspector first. I would hate to spend that kind of money on something that I would not be able to use.
Thanks for the help
Chetty, I agree with Sailor. Ullmers is a great company. They are only 90 minutes north of me. I have not bought from them personally, but have always heard good things about them, and would use them if the need arose.
terry@ Dairy Fab
www.curdknives.com (http://www.curdknives.com)
I would bet they would offer some type of guarantee if you asked.
I am going to get the inspector to look at the press and make sure he will accept it. If he will I think I will get it. Thanks for all the help.
Margaret at Glengarry has launched a new online ordering system.
Click here: Glengarry (http://www.glengarrycheesemaking.on.ca/)
She has a brand new 2 piston press for just $3995 Canadian or $3580 USD.