Hi all,
I have 2 bandaged Cheddars on the go at the moment and both have been maturing for a little over 2 months, I know mold growth is expected on the outside of the wraps, however, there is blackish mold developing underneath the bandaging, should I strip & wash it, then re-bandage or should I leave it? Thanks
I had this problem as well. I'd say strip it. If you think the inside of the cheese will be fine, rebandage using way more lard or butter. Slather it on there.
Yo! what Stinky says..... 8)
Hi Nigel, Welcome to the Forum... I always bandage my cheddars and there will always be mould - sorry but .... help is at hand. One of the issues when 'hand bandaging' is that sometimes there is not enough sacrificial layers of cloth and lard applied. I'm a three layer guy.
https://cheeseforum.org/forum/index.php/topic,13778.0.html (https://cheeseforum.org/forum/index.php/topic,13778.0.html)
Don't be discouraged by the appearance of the mould.. they can get quite scary looking but with enough layers - minimum of 3 :), it will come out like this.
https://cheeseforum.org/forum/index.php/topic,10377.0.html (https://cheeseforum.org/forum/index.php/topic,10377.0.html)
Finally here is the unveiling of my 9 month Cheddar. Note that as the layers come off so does the mould.
https://cheeseforum.org/forum/index.php/topic,13721.0.html (https://cheeseforum.org/forum/index.php/topic,13721.0.html)
If you are concerned you can always strip it, clean it down well, let it dry and make sure that no mold has survived the washing - and rebandage it.. It will be good.
-- Mal
Thanks for your help guys
@Mal, I think I've actually learned more from your posts than from any cheese making books I've read so far, I'll definitely use 3 layers from now on, as for the lard I think I used a good 1/2 pound on each one, but you can never have too much fat, as these are my first 2 cheeses, I think I'll chalk this up to experience and strip/wash them (just in case). I'll be knocking up a couple more wheels come the Easter weekend, so wish me luck.
Cheers Nigel.
Thanks Nigel, I appreciate that.. Maybe sometimes the simple act of doing complements what you read. The other forum members have an amazing range of experiences of which I'm humbled to be able to add mine.
Hope to see more of your cheese.
-- Mal
Quote from: Stinky on March 26, 2015, 06:12:27 PM
I had this problem as well. I'd say strip it. If you think the inside of the cheese will be fine, rebandage using way more lard or butter. Slather it on there.
yeah strip it back and apply a liberal amount of fat... get a good airtight seal.
Hi All
Just a quick update, both cheddars were striped, washed and re-bandaged (I think I used about a kilo of lard on these two), they're now happily maturing in the cave.
Hurrah! Congratulations!
They look good a cheese for your efforts. 8) (And I accidentally gave Stinky one as well. :o )
Thank you! :D I'm sure I deserved it some way or another. ::)
Nigel: A cheese for you... :)